A6001A is a compact spectrometer with selectable wavelength configurations across 315–1100 nm for measurement and system integration.
Key characteristics of this model.
Small-form-factor design for compact optical systems and embedded measurement systems.
Cost-effective option for general-purpose spectrum acquisition and basic optical measurement.
Selectable wavelength range and optical resolution for application-specific setups.
SMA905 input, USB 2.0, optional serial communication, trigger modes, and SDK support.
Core optical, detector, interface, and mechanical specifications.
| Wavelength range | 315–1100 nm |
|---|---|
| Detector | Toshiba TCD1304 linear CCD |
| Pixel count / size | 3648 pixels, 8 µm × 200 µm |
| Optical resolution | Approx. 0.35–1.0 nm, configuration-dependent |
| Signal-to-noise ratio | 300:1 at full signal |
| Dynamic range | 300:1, single acquisition |
| Integration time | 4 ms–10 s |
| A/D resolution | 16 bit |
| Fiber connector | SMA905 |
| Communication | USB 2.0 and RS-232 |
| Dimensions / weight | 94 mm × 60 mm × 36.5 mm / 0.3 kg |
| Power supply | USB |
Optical resolution is an approximate configured value and depends on the wavelength range, grating, slit width, and optical setup.
Representative configurations are listed below.
| Model | Wavelength Range | Optical Resolution | Slit |
|---|---|---|---|
| A6001A-02 | 400–1100 nm | ~1 nm | 25 µm |
| A6001A-05 | 750–1100 nm | ~0.5 nm | 25 µm |
| A6001A-06 | 350–1050 nm | ~1 nm | 25 µm |
Other wavelength ranges, optical resolutions, and slit sizes are available on request.
Representative applications for this model.
Spectrometers are easier to understand when shown with the light source, fiber, and probe path.
Compare related models by wavelength range and measurement requirement.